Invicta 360 Instruction Manual And Warranty page 24

CHRONO GRAPHS WITH DATE , DAY AND MONTH
Setting the Time, Date and Day
1. Pull out the crown to position 1.
2. Turn the crown until you reach the correct date. If you change the date
between 9:00pm and 12:00pm, it must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2.
4. Turn the crown clockwise until you reach the correct time.
5. Turn the crown counterclockwise until you reach the correct day.
6. Push the crown back into position 0. The watch will begin running again.
44
CHRONO GRAPHS WITH DATE , DAY AND MONTH
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
1. Start: Press push-button A.
2. Stop: Press push-button A again and read the 3 chronograph counters.
3. Reset: Press push-button B. The three chronograph hands will be reset
to their zero positions.
Basic Function . Start/Stop/Reset
45