Setting The Alarm/Date - Invicta 360 Instruction Manual And Warranty

WATCHES WITH ALARM
Setting the Alarm
1. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
2. Switch alarm ON/OFF: Press the push-button briefly.
2 beeps: Alarm switched ON
1 beep: Alarm switched OFF
20
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until you reach the correct date. If you are setting the
date between 9pm and 12pm, the date must be set to the following
day as dates set between these hours do not automatically change at
midnight.
3. Push the crown back into position 0. The display changes from refer-
ence to alarm time.
! PLEASE NOTE . Setting the date too quickly in quick mode can result in
the incorrect date being displayed. Switching the date between 01 and
31 restores the synchronization.
WATCHES WITH ALARM
Setting the Date . Quick Mode
21