Panduit PAT1M Operation Manual page 38

PAT1M / PAT1.5M OPERATION MANUAL
NOTE: PDM with software revision earlier than Revision 0.8 (visible on display for 5 seconds during power
"ON"), require the following operator corrective action: (same possible cause and prevention apply).
PDM Software, Revision 0.7 or lower
Tie in Tool
Help Buzzer Continue
CORRECTIVE ACTION: Press the BUZZER button to turn the buzzer signal "OFF". Remove the cable tie and
any obstruction from the jaw area and verify the head is clear. Press the CONTINUE button to resume
operation.
PAT1M/PAT1.5M: PA22222A01_03 Page: 36 of 36 Dec., 2007
Downloaded from Elcodis.com electronic components distributor