General - ADC DSX-3 Installation Manual

SECTION 1: DESCRIPTION
Content
1

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

2 FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
2.1
2.2
2.3
2.4
3 FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
4 PHYSICAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
4.1
4.2
4.3
4.4
4.5
4.6
5 SYSTEM SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
_________________________________________________________________________________________________________
1 GENERAL
This section describes ADC's DSX-3 (DSX-4U-24) Rear Cross-Connect System and its
applications in large and small offices, digital loop carriers, and customer premises. The system
provides for test access, patch, cross-connect, and monitor functions in 75 ohm digital
transmission systems operating with a common signal format and bit rate. Bit rates of digital
systems in which this cross-connect system may be used are:
• 2.048 megabits per second.
• 8.448 megabits per second.
• 34.368 megabits per second.
• 51.84 megabits per second.
• 139.264 megabits per second.
• 155.52 megabits per second.
The DSX-3 (DSX-4U-24) Rear Cross-Connect System is typically used between multiplexing/
demultiplexing or digital switch equipment and a transmission medium such as digital coaxial
cable, microwave radio, or fiber optics. It is recommended that signals from all digital
equipment are maintained at an equal level at the cross-connect system by means of office-
provided pads and equalizers which compensate for the various cable lengths. This allows for
testing, patching, and rearranging of compatible equipment at the cross-connect system without
having to readjust signal levels.
Modularity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Tracer Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
DSX-4U Circuit Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7
DSX-4U Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9
Fuse Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9
Cable Rings and Troughs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Cable Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Cross-Connect System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
ADCP-80-353 • Issue 2 • August 2002 • Section 1: Description
© 2002, ADC Telecommunications, Inc.
Page
Page 1-1