Table of Contents
Advertisement
1.INSTALLATION
STEP 1
1- Find the perfect location for mounting the range hood. For
best results, the mounting height of the range hood should be
25"- 36" above the top of the cooking range.
2- Trace the outline of your hood on a panel of its cardboard
box.
3- Find the mounting holes and center point of the hood
(directly between the mounting holes) and mark them on the
cardboard panel.
4- Carefully cut out the cardboard outline.
5- Tape the cardboard cutout panel to the wall lining it up with
the horizontal line (bottom of hood location) and matching
the center point with the center line of the installation area.
6- Poke holes through the mounting points on the cardboard
marking the locations on the wall and remove the cardboard.
7- If using wall anchors, pre-drill the mounting holes where
your marks are with the correct size bit and insert the wall
anchors.*
8- Screw in mounting screws to the marked studs and or wall
anchors, leaving roughly a 1/4" gap. This gap will be used to
hang the hood in STEP 3.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
STEP 2
1- Place the chimney bracket against the ceiling, matching the
center point of the bracket with the center line of the
installation area.
2- Mark the locations of the bracket holes on the wall and drill
the holes where the locations are marked (The size of drill bit
will depend on the size of hole that the wall anchor calls for).
3- Insert wall anchors in the drilled holes and screw the
bracket into place. The chimney will mount to the bracket.
Advertisement
Table of Contents
