Kucht COLOR Series Installation Manual And User's Manual page 2

Model KRH4815A – 48" Wall Mounted Color Series Hood
Product Introduction
Thank you very much for choosing our range hood. KUCHT has developed a series of range hoods based on assimilating the
advantages of high volume of air, lower noise and elegant appearance.
USE, CARE, AND INSTALLATION GUIDE
Please read all manual carefully before installing and operating this appliance.
CONTENTS
1. Tools
2. Installation
3. Technical parameters
4. Maintenance
5. Cautions
READ ALL INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS APPLIANCE.
• The installation instructions in this manual are intended for qualified installers, service technicians, or persons with similar
qualified background. Installation and electrical wiring must be done by qualified professionals and in accordance with all
applicable codes and standards, including first-rated construction.
DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate
electrical and technical background. Due to the size and weight of this range hood, two people installation is recommended.
• Range hood may have very sharp edges; please wear protective gloves if it is necessary to remove any parts for installing,
cleaning or servicing.
• Activating any switch ON before completing installation may cause ignition or an explosion.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
• For general ventilating use only. DO NOT use to exhaust hazardous or explosive materials and vapors. The combustion air
flow needed for safe operation of fuel-burning equipment may be a ected by this unit's operation. Follow the heating
equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association
(NFPA), and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
Su cient air is needed for proper combustion and exhausting of gases through the duct to prevent back drafting.
• Before servicing or cleaning unit, switch power OFF at service panel and lock service panel to prevent power from being
switched ON accidentally.
• Metal ductwork may be required based on local codes.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL