General Features; Front Panel Features; Rear Panel Features - Master audio DX Series User Manual

1 - GENERAL FEATURES

Our amplifiers are modular design. The metal chassis is very rigid and the interior
design provides easy access to the electronic circuits.
Fully independent safety circuits protect the amplifier in the event of a short circuit of
the loudspeaker output, abnormal increases in temperature and/or excessive
amplifier consumption.
These amplifiers offer high performance and damping factor, which results in clean
response to transients and high quality playback. The heat sinks, of our own design,
combine high heat dissipation with a reduced weight and thermal inertia.

2 - FRONT PANEL FEATURES

- On-Off switch (1).
- Volume (2) potentiometers (GAIN).
- Indicators of Protection (3).
- Indicators of Clipping (4), Clip limiter.
- -10dB Output signal (5).
- -20dB Output signal (6).
- Indicators of Bridge/Parallel (7).
- Indicator of POWER (8).
4 3 3 4 7
5 6 2 6 5 1 8 7

3 - REAR PANEL FEATURES

- Forced ventilation turbines (1).
- Input signal (2).
- Bridge/Parallel/Stereo switch (3).
- 0.7V / 1V / 1.4V Sensitivity switch (4).
- Ground switch ON/OFF (5).
- Loudspeaker output connection. (6 – Binding post) (7 – Speakon) .
- Fuse (8). - 230V power supply (9).
3 4 8
1 2 5 6/7 9 1
9