Technical Features; Certificate Of Warranty - Master audio DX Series User Manual

12 - CLIP LIMITER CIRCUIT
This Led indicates the action of the clipping limiter, avoiding output distortion. Make
sure this Led is not alight permanently! No extra power is obtained in this way and
dynamics are lost.
When the amplifier is in danger of being damaged by excessive temperature due to
inappropate installation or any other anomaly thus exceeding the safety limits,
(temperature >90ºC), the corresponding safety circuit will cause a stoppage for a few
seconds, with the Led coming alight. They will also light up in the event of any short-
circuiting occurring at the loudspeaker output.

13 - TECHNICAL FEATURES

Technical Features
Frequency response
Input Impedance
Damping Factor (1KHz)
Crosstalk
Sensitivity
Signal/Noise ratio
Output power (1KHz - 0,1% THD)
Maximum Power Consump.(Musical prog)
Dimensions
Weight
All specifications and features are subjected to change without prior notice JUN 2005
If you follow this instructions manual and recommendations, we are sure that this
amplifier will always perform within the predetermined parameters, ensuring its long
life and total efficiency.

14 - CERTIFICATE OF WARRANTY

The Conditions and Observations for the application of this Contract of
Warranty are for all the territories of the Spanish State.
For other countries, the specifications of each country must be
complied with, as only the Representative or National importer
themselves can be held responsible for warranty terms.
For any claim of a Legal type, only the Ordinary Courts corresponding
to the city of Terrassa (Barcelona-Spain) will be valid.
Please follow the instructions on the last page of this manual.
20 kOhm(Bal) / 10kOhm (Unbal)
Both channels 4 Ohm
8 Ohm
One channel 4 Ohm
Bridge (Mono) 8 Ohm
13
500 1000
20 Hz - 20 KHz (+/- 1dB)
>260 >300
>60 >65
0.7V/1V/1,4 V
>100 >100
400 750
240 420
480 840
800 1500
2A 3A
88x482x438 mm
16.2 Kg 17.2 Kg
2000
>350
>70
>103
1300
700
1400
2600
5A
19.4 Kg