Please Install The Projector On An Even And Stable Surface; Changing Parts - Hitachi LP-WU6600 User Manual

Please install the projector on an even and stable surface

Avoid placing the projector on unstable cart, tripod, table and so forth to prevent the projector from
falling, becoming damaged or causing injuries.
Servicing
Should you encounter problem with the projector, please seek assistance from your local dealer or
qualified service personnel. Do not attempt to service the projector by yourself so that you would not
be exposed to high voltage or other potential hazards.
No service is allowed except by authorized personnel.
Should you encounter any of the following situation, please unplug your projector from the wall outlet
and contact a qualified service personnel for assistance:
• Damaged power cord or power plug.
• If a foreign object has fallen into the projector or if you have spilled water or other liquid into the
projector.
• If the projector has been dropped accidentally or damaged.
• If you experience noticeably poor performance or malfunctioning with the projector despite having
followed instructions for normal operation.

Changing parts

Should any part of the projector be damaged, check with your servicing personnel that only
manufacturer certified parts were used for replacement. Used of non-certified parts may result in
damages to the projector or hazards such as fire or electric shock. After changing parts, be sure to
remind the servicing personnel to perform safety inspections to ensure that the projector operates
normally.
No maintenance allowed by end user, Do not open the cabinet.
No user serviceable part inside.
Warning, Notices and Safety Instructions
English-7