Table of Contents
Advertisement
I/O Port (Input / Output)
1. RJ45
Connect a LAN cable from Ethernet.
2. MONITOR OUT (D-sub 15-pin mini
shrink jack)
Connect to a monitor.
Loop thru only for COMPUTER IN.
3. USB POWER (USB A type jack)
Connect a USB device. (Support 5V/1.5A
output while the projector Power On.)
4. COMPUTER IN (D-sub 15-pin mini
shrink jack)
Connect to a PC.(Support RGB and
component video signal input).
5. 3D SYNC (5V) (VESA 3-pin)
IN: Connect to a PC, 3D player or
synchronizer.
OUT: Connect to 3D IR glasses receiver
unit.
6. HDBaseT (RJ-45 jack)
Connect to HDBaseT source via LAN
cable.
7. DVI-D
Connect to DVI-D source.
8. VIDEO (RCA jack)
Connect to the composite video device.
9. SERVICE
For service personnel only.
10. HDMI 1 (Digital audio/video connector)
Connect to HDMI or DVI source.
11. HDMI 2 / MHL (Digital audio/video
connector)
Connect to a HDMI or MHL-compatible
device.
Projector parts and functions
12. RS-232C (9-pin D-sub socket) (Cross
cable)
IN: Connect your PC or system control
equipment.
OUT: Connects to another projector (same
model).
13. BNC
Connect to BNC inputs for RGB (R/B/G/
H/V) or component (YPbPr) source.
14. AUDIO IN (L/R) (RCA jack)
Connect an audio source. (Available for
Video signal input.)
15. AUDIO OUT (L/R) (RCA jack)
Connector to an audio amplifier device.
16. AUDIO IN (3.5 mm, mini jack)
Connect an audio source input. (Available
for Computer, BNC, DVI-D source.)
17. WIRED REMOTE (3.5 mm, mini jack)
IN: Usable wired-remote-control with
accessory cable.
OUT: Connect to another projector (same
model) "WIRE REMOTE IN" for
serial control.
18. 12V TRIGGER (3.5 mm, mini jack)
Outputs 12V (+/- 1.5V) 350 mA for relay
system control.
English-19
Advertisement
Table of Contents
