Download Print this page

Intermec AV10 Compliance Insert

Communication dock

Advertisement

Quick Links

AV10 Compliance Insert
For Users in the United States and Canada
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l'usager doit, avant l'utilisation, lire toute la documentation incluse.
Caution: For use with Intermec Models CK3a, CK3n, and CK3c only. Use only Intermec approved vehicle
installation methods. For continued protection against risk of fire, replace only with same type and ratings of
fuse.
Attention: Pour utilisation avec le modèles Intermec de la série CK3a, CK3n, et CK3c seulement. N'utiliser que
des méthodes d'installation dans un véhicule approuvées par Intermec. Pour une protection continue contre les
risques d'incendies, remplacez seulement avec des fusibles du même type et du même calibre.
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The
use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies
Corporation, may void the compliance of this product and may result in the loss of the user's authority to operate the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the radio or television receiving antenna.
Increase the separation between the computer equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.

Battery Information

Caution: Use only Intermec battery pack Model AB17, AB18, or AB26. Use of incorrect battery pack may
present risk of fire or explosion. Promptly dispose of used battery pack according to the instructions.
Attention: N'utiliser que le modèle de bloc-piles Intermec AB17, AB18, ou AB26. L'utilisation d'un mauvais
bloc-piles pourrait constituer un risque d'incendie ou d'explosion. Mettre rapidement au rebut tout bloc-piles
usé, conformément aux instructions.
Battery Recycling Information
This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful
life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix
this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or
Li-ion
Li-ion
disposal information.
Ce produit contient ou utilise une pile principale au lithium-ion (Li-ion). Lorsque la batterie atteint la fin de sa
durée de vie utile, la batterie usées doivent être mises aux rebuts par un agent de recyclage ou un manipulateur de
matériaux dangereux agréé. Il ne faut pas mélanger la batterie aux autres déchets solides. Pour plus
d'informations sur le recyclage ou la mise aux rebuts, contacter votre centre de services Intermec Technologies.
Note: In the U.S.A., the EPA does not consider spent Li-ion batteries as hazardous waste.

Advertisement

loading

Summary of Contents for Intermec AV10

  • Page 1: Battery Information

    The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
  • Page 2 The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
  • Page 3 Methoden für den Einbau in Fahrzeugen verwenden. Für fortwährenden Schutz gegen Brand nur durch eine Sicherung gleichen Typs und Nennwertes ersetzen. Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche...
  • Page 4 거나 장비 조작에 대한 사용자의 권한이 박탈될 수 있습니다 . 배터리 정보 주의 : Intermec 배터리 팩 AB17, AB18, 또는 AB26 모델만 사용하십시오 . 그 외 배터리 팩을 사용할 경우 화재나 폭발 위험 이 있습니다 . 다 쓴 배터리 팩은 지침에 따라 올바르게 폐기하십시오 .
  • Page 5 Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso. Precaución: Para usar sólo con el Modelos Intermec CK3a, CK3n, y CK3c. Use sólo con métodos de instalación en vehículos aprobados por Intermec. Para continuar la protección contra el peligro de incendio, cambie sólo por el mismo tipo y capacidad nominal de fusible.
  • Page 6 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2008 Intermec Technologies Corporation. All rights reserved. AV10 Compliance Insert *933-158-001* P/N 933-158-001, Revision A...