Installing The Main Unit - Clarion VRX785BT Owner's Manual & Installation Manual

6. INSTALLING THE MAIN UNIT

Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Wire as shown in Section 9 (see page 77).
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
7-3/16" (182 mm)
Hole
Screwdriver
Outer escutcheon
74
VRX785BT
Hole
Stoppers
Main Unit
2-Spring
Note:
Set the outer escutcheon
so that its metallic part on
the back side fits the upper
edge of the main unit.
Figure 6
Note:
• Some car models require special mounting kits for
proper installation. Consult your Clarion dealer for
details.
• Fasten the front stopper securely to prevent the
main unit from coming loose.
Strap
* This part is not provided.
Instrument panel
Universal mounting bracket
Stoppers
Hexagonal
bolt