Ejecting A Disc - Clarion VRX785BT Owner's Manual & Installation Manual

Setting/Ejecting a Disc
On Discs
• Exercise a good precaution when loading a
disc with the panel open.
• Never turn off the power and remove the unit
from the car with a disc loaded.
CAUTION
CAUTION
With the liquid crystal panel open, a driver
may not be able to see the disc insertion slot.
For your safety, insert a disc with the screen
closed.
Even when the liquid crystal panel is closed,
however, the recessed disc slot may be
difficult for a driver to see, care is needed
whenever inserting discs.
No/Non
22
VRX785BT
Setting a disc
1. Insert a disc into the center of the insertion
slot with the label side facing up.
The disc will automatically be drawn into the
DVD player.
After setting a disc
The system will automatically be switched to the
relevant source media mode according to the
disc, and start playing back the disc.
When a DVD video disc is set:
The system is switched to the DVD Video mode.
See "DVD Video Operations" (page 29).
When an Audio CD is set:
The system is switched to the CDDA mode. See
"Audio CD Operations" (page 35).
When a CD/DVD with MP3/WMA/AAC/DivX
files is set:
The system is switched to the MP3/WMA/AAC
mode or DivX mode according to the Playform
setting. See "MP3/WMA/AAC Operations"
(page 37) or "DivX Operations" (page 40).
Note:
• Never insert foreign objects into the disc insertion
slot.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
• 8 cm (single play) discs cannot be used.
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.

Ejecting a disc

1. Press the [o] (EJECT) button to eject the
disc.
The screen changes to the DVD mode
screen, and "EJECT" appears.
• If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload).
2. Remove the disc carefully.
Note:
• If you force a disc into the insertion slot before auto
reloading, this can damage the disc.