Charging Process - CipherLab RS51 Reference Manual

RS51 Mobile Computer

CHARGING PROCESS


Please ensure to charge battery indoor such as a well-ventilated room between 20
.

Do NOT charge battery under direct sunlight.

When selecting the cell count or voltage for charging purposes, select the cell count and
voltage as it appears on the battery label. As a safety precaution, please confirm the
information printed on the battery is correct.

Lithium Polymer/Li-ion batteries has limited life cycle for charging and discharging. When life
cycle has been reached, battery may swell.

The allowed charging temperature is from 0

During discharge and handling of batteries, do not exceed 45 .
STORAGE & TRANSPORTATION

CipherLab battery is charged in manufacturing to around 30% of its full capacity. It is a good
capacity for long-term storage & transportation.

Battery should NOT be stored in full-charged or full-discharge state; otherwise it will damage
battery permanently.

Battery subjects to discharge even when not installed in a device. For any stored & un-used
battery, it is highly recommended for every 3 months to charge battery to 40%~60% of its
original capacity to prolonged storage.

Always detach battery from device if you will not use device for long period of time.

Store battery indoor temperature between 0

Do NOT store battery in temperature exceeding 50 , and never expose battery pack to high
external pressure for extended periods, which can lead to an internal short circuit and
overheating.

When transporting or temporarily storing in a vehicle, temperature range should be greater
than 0 but no more than 45 .

Storing battery at temperatures greater than 50
hours) may cause damage to battery.
to 45 .
to 30 for the best performance.
for extended periods of time (more than 2
- 8 -
to 30