Configuring The Sr61 Parameters; Configuring The Sr61 With Easyset - Intermec SR61 User Manual

Configuring the SR61 Parameters

Configuring the SR61 With EasySet

SR61 Cordless Scanner User's Manual
Chapter 2 — Connecting and Configuring the SR61
You can configure many parameters on the SR61, such as the bar
code symbologies it decodes or the volume of the beeper. These
characteristics are controlled by configuration commands. The
values you set for these configuration commands determine how
the scanner operates.
You can configure the SR61:
• using EasySet version 5.4.1 or later. For help, see the next
section, "Configuring the SR61 With EasySet."
• remotely from your Intermec computer. For help, see
"Configuring the SR61 From Your Intermec Computer" on
page 21.
• remotely from your host PC using Intermec SmartWedge. For
help, see the instructions that ship with SmartWedge.
EasySet is an Intermec configuration application that provides
you with two ways to configure the SR61:
• Send configuration commands from EasySet directly to the
SR61.
• Send configuration commands to a bar code setup sheet. You
can scan the bar codes onscreen with your SR61xA, SR61xV,
or SR61xE or you can print the setup sheet and scan the bar
codes. You do not need a Bluetooth connection to use this
method.
To configure the SR61 by sending commands from EasySet
1 Establish a Bluetooth connection with your host PC.
2 Start EasySet. The first time you start EasySet, the Select
product dialog box appears.
If the Select product dialog box does not appear, choose
Product > Select.
3 Select the SR61.
4 Select Communication > Connect. The Online Setup dialog
box appears.
19