Advertisement
PRODUCT DESCRIPTION
Heating
Fire adjustment
OFF
Slow fire
Middle fire
1. Cooker lid handle
3. Non-stick inner pot
5. Body handle
7. Control panel
9. Power regulator
PERFORMANCE CHARACTERISTICS
Having temperature control function to control cooking temperature.
1.
2.
Provided with temperature safety device, to prevent from unusual
overheat.
3.
Removable non-stick inner pot, easy to clean.
4.
High temperature transparent glass lid.
High fire
2. Cooker lid
4. Heating plate
6. Stainless steel body
8. Power regulator
OPERATING INSTRUCTION
1.
Be sure to clear water drop, outer of the pot and heating
surface, then place the inner pot into the cooker body and gently
rotate it several times to ensure that the inner pot is steadily placed
and has a good contact with the heating plate.Otherwise, it will
caused poor heat transfer and affecting the normal temperature rise.
2.
Before plug the unit, please put the power regulator to "off" position,
make sure the power supply is 240V AC electricity,the outlet can
withstand rated current of no less than 10A, and safe earthing is
available. Otherwise the unit is not allowed to use.
3.
Cooking Function : Stir fry, frying, steaming, slow cooking,warming
and steamboat.
a. After plugging in the unit, set the power regulator to the function
position required (at this moment the appliance lamp light up).
b. After cooking some time, set the power regulator to a position as
required.
c. Set the power regulator to keep warm function.
d. After finished using, set the power regulator to "off" position,and
be sure to pull out the plug.
Attention!
Where the unit is used for the first time or the socket is
frequently used, please regularly check whether the plug can
match the socket wall; methods for inspection: first insert the
plug into the socket, turn off the unit after it operates for half
an hour and then pull out the plug. Check whether the plug
pins burn the hand. If they are so hot to burn the hand
(approximately over 50°C), please make sure to replace the
socket by a well contacted socket so as to prevent from
burning out the plug or fire due to the overheat caused by
poor contact.
Advertisement
