Intermec SF51 User Manual page 33

setup sheet and scan the bar codes. You do not need a
Bluetooth connection to use this method.
For more information about EasySet, see the EasySet software.
For descriptions of the configuration commands, see Chapter 4,
"Configuration Command Reference."
To configure the SF51 by sending commands from EasySet
1 Establish a Bluetooth connection with your host PC.
2 Start EasySet version 5.4 or later. The first time you start
EasySet, the Select product dialog box appears.
If the Select product dialog box does not appear, choose
Product > Select.
3 Select the SF51.
4 Select the Online Setup check box, and click OK. The
Online Setup dialog box appears.
5 Select the COM port that your SF51 is using for Bluetooth
communications, and click OK.
EasySet connects to your SF51 and retrieves the current
configuration of the SF51.
6 In the Commands window, choose configuration command
settings for your SF51.
Your SF51 is updated with the new configuration command
settings, and the settings are added to the bar code setup sheet.
Note: The SF51 does not beep when you send
configuration commands online from EasySet.
To configure the SF51 by scanning bar codes
1 Start EasySet version 5.4 or later. The first time you start
EasySet, the Select product dialog box appears.
If the Select product dialog box does not appear, choose
Product > Select.
2 Select the SF51, and click OK.
SF51 Cordless Scanner User's Guide
Chapter 2 — Connecting and Configuring the SF51
19