How To Turn On The Sf51; Understanding The Lights - Intermec SF51 User Manual

Chapter 1 — Learning About the SF51

How to Turn On the SF51

You use the Scan button to turn on the SF51.
To turn on the SF51
• Press the Scan button.
The first time you press the Scan button to turn on the SF51, it
enters a discoverable state so that your host Bluetooth device can
perform a device discovery and establish a Bluetooth connection.
If the status light on the SF51 turns red when you try to turn
on the scanner, you need to charge the battery. For help, see
"Charging the Battery" on page
To turn off the SF51
• Scan this bar code:
Scanner Power Down
\60\08\2A\46

Understanding the Lights

The lights on the SF51 turn on to indicate the status of the
battery, a successful decode of a bar code, or the status of the
Bluetooth connection.
Status light
SF51 Lights: The status light turns green or red to indicate the status of the
battery and scanning. The blue Intermec Ready-to-Work™ indicator turns on
to let you know that the SF51 is ready to send data to your host Bluetooth
device.
4
3.
Intermec
Ready-to-Work
indicator
SF51 Cordless Scanner User's Guide