Table of Contents
Advertisement
PJ500C-LCD, PJ700C-LCD & PJ1000light
Four LEDs on the front panel provide for machine status indication (ON, FAULT/
LOCK, FOLDBACK, RF MUTE) and two yellow LEDs provide Power Supply fault
indication.
The amplifier management software is based on a menu system. User has four
navigation buttons available to browse submenus: ESC,
, and ENTER.
,
The rear panel features the mains input connectors with a mains voltage switch
(chap. 6.2) to select the appropriate mains input voltage, RF input and output
connectors, telemetry connector, protection fuses, interlock input and output
connectors and a BNC connector that provides an RF test point with level being
-60 dB lower than power ouput.
4 / 32
Rev. 1.0 - 20/06/08
User Manual
Advertisement
Table of Contents
