LITESHEET BLTL BriteCor Installation Manual

Ac direct linear task light

Download this manual

BLTL BriteCor AC Direct

Linear Task Light

Installation Manual

Page 1 BLTL BriteCor AC Direct Linear Task Light Installation Manual...
Page 2: Contents Of Kit
BLTL Linear Task Light Installation Manual NOTES • WARNING – Risk of fire or electric shock. • WARNING – It is recommended that installation be performed by a certified electrician. • WARNING – All electrical connections must be in compliance with local codes, ordinances or the national electrical code (NEC).
Page 3 LiteSheet Solutions Magnet Mount Kit Guide 1. Insert (2) M6 square nuts into one of the channels on the Luminaire. Attach and hand tighten the magnets to the M6 nuts. Page 3 of 7...
Page 4 BLTL Linear Task Light Installation Manual 2. Attach luminaire to desired surface. Plug the luminaire into an outlet to power on the fixture. 3. Unplug power cable before moving the luminaire. Page 4 of 7...
Page 5 LiteSheet Solutions Arm Mount Kit Guide 1. Insert the ¼-20 bolt into one of the channels on the luminaire into one of the channels. Arm should be mounted in the center as shown. Page 5 of 7...
Page 6 BLTL Linear Task Light Installation Manual 2. Attach luminaire to desired surface using the clamp. NOTE: Clamp needs to be fully tightened to avoid the luminaire falling off. Tighten at all three points shown. Do not overtighten to avoid cracking the hardware. 3.
Page 7 LiteSheet Solutions For warranty information and technical support, contact us at: 434-446-1460 Find more great products at: www.litesheet.com Page 7 of 7...