Advertisement
Quick Links
Advertisement
Related Manuals for LITESHEET BriteCor AC BAA
Summary of Contents for LITESHEET BriteCor AC BAA
- Page 1 BAA BriteCor AC Direct Area Light Installation Manual...
- Page 2 Never use a fixture in a two-wire system that is not grounded. • If dimming functionality is included, use only with Litesheet approved dimmers. • This unit is not approved for use in ducted ceilings. • Do not use excessive force when manipulating cables and wires.
-
Page 3: Contents Of Kit
LiteSheet Solutions CONTENTS OF KIT • BAA Area Light Luminaire • Mounting Bracket • Extra #8 screws for attaching access plate TOOLS AND ADDITIONAL PARTS REQUIRED • #2 Phillips Screw Driver • ¼” Drive BAA Area Light Access Plate Page 3 of 7... - Page 4 BAA BriteCor Area Light Installation Manual Preparation 1. Turn off power source. 2. Attach the mounting bracket through the screw holes on the fixture. 3. Attach any other supplemental mounting hardware as provided. Page 4 of 7...
- Page 5 LiteSheet Solutions Installation 1. Mount the luminaire using the bracket provided (NOTE: Bracket may be different than the one pictured.) Route the incoming line power through the access port. Mounting Bracket Access Port 2. Remove the 2 screws on top of the fixture shown.
- Page 6 BAA BriteCor Area Light Installation Manual 3. Connect the incoming ground connection to the green ground screw provided. Connect the incoming line power to the luminaire connector provided. • Black – Line Power (Hot) • White – Neutral • Green – Safety Ground 4.
- Page 7 LiteSheet Solutions Page 7 of 7...