Advertisement
Quick Links
Advertisement
Related Manuals for LITESHEET BriteCor AC Direct BHLB Series
Summary of Contents for LITESHEET BriteCor AC Direct BHLB Series
- Page 1 BHLB BriteCor AC Direct Hazardous Location Brik Series Installation Manual...
- Page 2 Never use a fixture in a two-wire system that is not grounded. • If dimming functionality is included, use only with Litesheet approved dimmers. • This unit is not approved for use in ducted ceilings. • Do not use excessive force when manipulating cables and wires.
- Page 3 LiteSheet Solutions CONTENTS OF KIT • BHLB Luminaire • (Optional) Mounting Brackets TOOLS AND ADDITIONAL PARTS REQUIRED • P2 Philips Head Screwdriver / Drill • Flat Head Screwdriver • 3/8” Drive Preparation 1. Turn off power source. Drill and attach mounting screws to mounting surface.
- Page 4 BVT BriteCor High Bay Installation Manual 2. Lock the bracket in place using the #8-32 side screw. Installation (Adjustable Bracket) 1. Mount the luminaire to the mounting surface using the attached brackets. 2. Adjust the angle of the luminaire to the desired position.
- Page 5 LiteSheet Solutions Wiring Guide 1. Temporarily remove the machine screws located on the luminaire as shown below to open the fixture. 2. Remove the PG 13.5 end cap from the fixture. Insert incoming power wires/ cable. Reseal the wire port with IP66 or Wet Location rated hardware (not included.)
- Page 6 BVT BriteCor High Bay Installation Manual Wiring Guide (Cont.) 3. Connect the incoming ground connection to the green ground wire provided. Connect the incoming line power to the luminaire disconnect provided. • Black – Line Power (Hot) • White – Neutral •...
- Page 7 LiteSheet Solutions For warranty information and technical support, contact us at: 434-446-1460 Find more great products at: www.litesheet.com Page 7 of 7...