Advertisement
Quick Links
Advertisement
Related Manuals for LITESHEET BriteCor AC Direct BFHB G3
Summary of Contents for LITESHEET BriteCor AC Direct BFHB G3
- Page 1 BFHB G3 BriteCor AC Direct Flat High Bay Installation Manual...
- Page 2 Never use a fixture in a two-wire system that is not grounded. • If dimming functionality is included, use only with Litesheet approved dimmers. • Do not use excessive force when manipulating cables and wires. •...
-
Page 3: Contents Of Kit
LiteSheet Solutions CONTENTS OF KIT • BFHB G3 Flat High Bay Luminaire TOOLS AND ADDITIONAL PARTS REQUIRED • Drill • Mounting Hardware (Sold Separately) Preparation 1. Turn off power to the circuit. 2. Remove fixture and mounting hardware from packaging. - Page 4 BFHB G3 BriteCor Flat High Bay Installation Manual Cable Kit Installation 1. Attach aircraft cable to the structural support. Adjust to the desired height. 2. Attach the luminaire to the aircraft cables through the holes shown. Adjust each cable until luminaire is level. 3.
- Page 5 LiteSheet Solutions Chain Kit Installation 1. Attach chains to the structural support. Adjust to the desired height. Attach the hooks to the chains. 2. Attach the luminaire to the hooks in the holes shown. Adjust the chains to level the luminaire.
- Page 6 BFHB G3 BriteCor Flat High Bay Installation Manual Stem Mount Installation 1. Install cross bracket onto pre-installed J-box. Attach wires to existing wiring using NEC approved methods, and feed through 3/8” IPS stem. 2. Install stem into cross bracket. Remove cover on fixture box. Make electrical connections from the stem to the fixture wiring following NEC standards.
- Page 7 LiteSheet Solutions For warranty information and technical support, contact us at: 434-446-1460 Find more great products at: www.litesheet.com Page 7 of 7...