Summary of Contents for LITESHEET BriteCor AC Direct BBS
Page 1
BBS/BSS BriteCor AC Direct Portable Luminaire Installation Manual...
Page 2
Never use a fixture in a two-wire system that is not grounded. • If dimming functionality is included, use only with Litesheet approved dimmers. • Do not use excessive force when manipulating cables and wires. •...
Page 3
Preparation 1. Turn off power source. Optional Vertical Mounting (Installation in Sheet Rock) 1. While holding the 5/8” x 6 ½” aluminum mounting piece to desired mounting position, transfer the holes to the drywall. Remove the mounting piece and drill (2) 5/16” holes. 2.
Page 4
BBS/BSS BriteCor Portable Luminaire Installation Manual 3. Bend (2) center tabs of each of 2 smaller mounting pieces to approximately a 45° angle. Place smaller mounting piece with dimples toward the wall over the longer mounting piece with tabs facing up. Line up holes on the 2 mounting bracket holes over the anchors.