Cleaning And Care - Silvercrest SMPS 7 E1 Operation And Safety Notes

NOTE: Set the speed to
the lowest setting after you
changed the rotating direction
or an attachment .
NOTES:
If you have treated hardened
skin, apply a moisturising
cream to the treated areas
after completing the procedure .
The attachments do not have
as much effect on softened
skin . Therefore, do not carry
out any pretreatment in a water
bath before using the product .
Always select the rotating
direction for treating the nails
in their direction of growth . If
possible, treat the nails from
the outside towards the inside
(to the nail tip) . Otherwise, the
nails will split more easily .
If you feel that the nails could
crack during treatment, select
the other direction .
˜ Cleaning and care
m WARNING! Risk of
electrical shock! Before
cleaning: Always disconnect
the power adaptor
socket-outlet .
Do not use chemical,
aggressive or abrasive
cleaning agents . These can
damage the surface of the
product .
from the
9 ] [
GB 23