Intermec PB42 Supplementary Manual page 2

To attach the shoulder strap to the PW50
Orient the shoulder strap so that the textured side of the strap padding is facing
1
toward the printer.
2 Attach the snap hooks directly to the PW50, or if you have a handstrap installed,
attach the snap hooks to the D-ring on the handstrap.
You are now ready to use the PW50 with the shoulder strap accessory.
Printer Shoulder Strap Instructions
*943-160-001*
P/N 943-160-001
Handstrap
D-ring
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.