Classic Accessories QuadGear Extreme 78097 Instructions

INsTRUCTIONs: UTV WINdshIeld
WARNING
Make sure your field of view is not obscured after mounting
your Windshield to your UTV roll cage.
CAUTION
Be sure your Windshield is strapped securely and tightly to
your UTV roll cage.

InstallatIon

1. Place your Windshield over the front of your roll cage with the
Classic Accessories logo on your windshield facing out and right side
up. Loosely attach your Windshield to your roll cage with the two top
straps then by the bottom two straps (Fig. 1).
2. Adjust the top straps and then the bottom straps to position your
Windshield in the center of the roll cage uprights (Fig. 2). When it is
centered and level tighten all the straps.
78097, 78617, 78627, 18-012-010401-00, 18-028-010401-00, 18-035-010401-00, 18-041-010401-00

CleanIng

Don't clean the clear plastic of your Windshield when it is dry—you
can scratch it. The best way to clean the clear plastic is to hose it
with water and rub it with your bare hands. Liquid soap may be used.
Clean the fabric areas of your Windshield with a soft brush and warm
water. DO NOT USE SOAP as it can damage the protective coatings
on the fabric. Air dry.

storage

To avoid mildew be sure that your Windshield is completely dry
before you store.

two year lImIted warranty

This product is factory warranted for workmanship and materials for
two years after purchase.
Fig. 1
Fig. 2
Classic Accessories, Inc.
Kent, WA, USA 98032
www.classicaccessories.com
© 2012
08cOA58_10242