InstructIons: utV rear WIndoW
WarnInG
Make sure your field of view is not obscured after
mounting your rear Window to your utV roll cage.
cautIon
Be sure your rear Window is strapped securely and
tightly to your utV roll cage.
InstallatIon
Attach the top straps to the OUTSIDE BACK of the
roll cage uprights first then attach the bottom
straps.
Working with the top straps first, tighten or loosen
the straps to position the window in the center of
the roll cage uprights (Fig. 1).
78637, 78647, 78657, 78667, 78677, 18-029-010401-00-SC, 18-042-010401-00
Once it is
centered and
level, tighten all
the straps
(Fig 2).
If installing with a Classic Accessories Quadgear
Extreme UTV Roll Cage Top (not included) note that
the Roll Cage Top attachment straps should go
below the top attachment straps of the your
Rear Window.
cleanInG
Don't clean the clear plastic of your Rear Window
when it is dry—you can scratch it. The best way to
clean the clear plastic is to hose it with water and
rub it with your bare hands or soft cloth. Liquid soap
may be used.
Clean the fabric areas of your Rear Window with a
soft brush and warm water. DO NOT USE SOAP as it
can damage the protective coatings on the fabric.
Air dry.
storaGe
To avoid mildew be sure that your Rear Window is
completely dry before you store it for an extended
period in an enclosed area.
Fig. 1
tWo year lIMIted Warranty
This product is factory warranted for workmanship
and materials for two years after purchase.
Fig. 2
Classic Accessories, Inc.
Kent, WA, USA 98032
www.classicaccessories.com
© 2010
10cOA55_11399
Need help?
Do you have a question about the QuadGear Extreme and is the answer not in the manual?
Questions and answers