Table of Contents
Advertisement
U S I N G T H E F R O N T P A N E L C O N T R O L S
Loading a Disc:
1.
Press the Open/ Close Button once to open the disc loading tray (the display will
indicate: open).
2.
Carefully load a disc into the tray recess with the label side up. Press the button
again to close the tray.
Note: Never load a disc until the drawer has opened fully, or try to close the
drawer until you are sure that the disc is properly seated in the holder recess.
Warped discs should never be played.
The drawer should only be opened and closed using the front panel control.
Under no circumstances should you attempt to open manually.
If a disc is not inserted or if the disc is damaged or inserted upside down, the CD
player will remain inoperative (Display will indicate: no disc).
Playing a Disc:
When a disc has been loaded, your CD Player will briefly spin the disc while it studies
the data encoded on it. The disc will then stop and the display will indicate the number
of tracks on the disc and the total play time.
•
To commence playing a disc, press Play/ Pause Button on the remote control or front
panel once. The disc will play from the beginning.
•
Press the Play/ Pause button a second time to pause the disc whilst it is playing.
Pressing the button again will resume playback from the point at which it was
paused. When paused, the disc continues spinning and the laser will still be
operational but locked. Please do not keep the CD Player in Pause mode any longer
than strictly necessary.
•
Press the Next Track Button to go forward to the start of the next track on the disc.
Repeated pressing will take you through the tracks on the disc.
•
When the disc is playing, press the Previous Track Button once to take you to the
beginning of the current track and immediately a second time to take you to the
start of the previous track.
•
When a disc is first loaded, you can use these buttons to select your desired track.
Having done so, press the Play/ Pause Button and your disc will commence playing
from the selected track.
•
You may select a track when Pause is engaged. In this case, the disc will revert to
Pause after the procedure is complete and you will have to press Play/ Pause Button
again to continue playing the disc.
6
roksan.com
Advertisement
Table of Contents
