Eu Directives; Ac Mains Supply - Roksan Audio K3 CD Di Set Up Manual And Product Manual

Hide thumbs Also See for K3 CD Di:
Table of Contents

Advertisement

E U D I R E C T I V E S
Roksan declares that the apparatus "K3 CD Di" complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC".
A C M A I N S S U P P L Y
Your K3 CD Di is set to operate from a fixed supply voltage which is marked on a label
next to the mains input plug. Before connecting the mains lead please check that your
mains supply corresponds to this label as below:
230 V Products
115 V Products
100 V Products
The mains lead supplied with this product has an IEC C13 mains plug which is inserted
into the Mains Input Socket on the unit's rear panel. The other end is a moulded plug
appropriate to that for your country. In the UK this is the standard UK13A plug.
NOTE: Other international markets will require a different value plug and
protection fuses. Please contact us for more details.
This plug should ordinarily not be removed from the lead. If you do remove it,
please dispose of it safely so that it cannot be plugged into a mains socket whilst in
a potentially dangerous condition. If your lead has been damaged please obtain a
complete replacement lead from your dealer.
Should you move to another area where either the mains voltage or the mains plugs
are different from those as supplied with your CD player, please contact the appointed
Roksan distributor for assistance.
Please observe correct mains polarity at all times.
The mains fuses are located on the rear panel below the IEC Mains Input Socket. These
must only be replaced by the fuse type and rating as described on the fuse rating label
on the rear panel of the unit.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
This product requires connection to earth (ground). The earth wire (in the UK this is
colour coded green/yellow) of the mains cable supplied with your CD Player must be
connected to a suitable earthing point established for this purpose by your electricity
supply company. If you are in any doubt, consult a qualified electrician. If the equipment
is likely to be unattended for a longer period of time, please unplug it from the mains
supply.
2
Voltage Range : 220 - 240 V
Voltage Range: 100 - 120 V
Voltage Range: 90 - 110 V
roksan.com

Advertisement

Table of Contents
loading

Table of Contents