Cd/Mp3/Wma Operations - Clarion Net DXZ638RMP Owner's Manual

CD/MP3/WMA Operations

2. Files without MP3/WMA data will not play.
The indication "––:––" appears in the play
time display if you attempt to play files with-
out MP3/WMA data.
G Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select "ISO9660 level
1, 2, 3 or JOLIET or Romeo" as the writing
software format. Normal play may not be pos-
sible if the disc is recorded on another format.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 128 single byte alpha-
betical letters and numerals (including an ex-
tension).
3. Do not affix a name to a file inside a folder
having the same name.
G Folder structure
1. A disc with a folder having more than 8 hier-
archical levels will be impossible.
G Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not al-
ways be played in the order displayed on the
PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can se-
lect which type of the recorded tracks to play.
G Default value is "CD".
Each time you press and hold the [BND] button
for about 1 second, the mixed mode is switched
between CD type or MP3/WMA type. The follow-
ing indication appears in the title display when
switching the track type to be played.
G Display when CD type track is selected:
G Display when MP3/WMA type track is se-
lected:
20
DXZ638RMP
1. Types of recording that can be played are as
follows.
Setting
Set to CD
Disc
Mixed with CD and
Play CD
MP3/WMA type tracks
CD type track only Play CD
MP3/WMA type track only Play MP3/WMA
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
CAUTION
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert for-
eign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD la-
bel, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [Q] button. Remove the disc after
it is ejected.
Listening to a disc already loaded
in the unit
Press the [FNC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication " NO
DISC" appears in the title display.
Set to MP3/WMA
Play MP3/WMA
Play CD
Play MP3/WMA