Clarion Net DXZ638RMP Owner's Manual page 28

Digital Radio / DAB Operations
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• "TP" may be lit in the display when a TP broad-
cast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to
the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
GSetting the INFO standby mode
If you press and hold the [TA] button for 1 sec-
ond or longer, "INFO" lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected an-
nouncement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
GCancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
GInformation select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
32
DXZ638RMP
1. Perform the following operation depending
on the connected model.
Press and hold the [TITLE] button for 1 sec-
ond or longer.
2. Press the [a] or [d] button to select "INFO
SEL", then press the [
"INFO SEL" mode.
3. Press the [a] or [d] button to select an in-
formation item. You can select any of 6
items:
Travel ➜ Warning ➜News ➜ Weather ➜
Event ➜ Special ➜ Travel ➜ ...
4. Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [TITLE] button to return to the
previous display.
PTY
This function enables you to listen to the se-
lected programme type, irrespective of the func-
tion mode.
∗ One common PTY can be selected for DAB or RDS.
∗ Of DAB PTY and RDS PTY, the PTY which is re-
ceived earlier takes priority over the other.
∗ PTY broadcasts are not yet available in all coun-
tries.
∗ In the INFO standby mode, INFO stations have pri-
ority over PTY stations.
∗ In the TA standby mode, TP stations have priority
over PTY stations.
∗ For details on "PTY", refer to the section "RDS op-
eration" of each owner's manual.
GSetting the PTY standby mode
GCancelling the PTY standby mode
GCancelling a PTY interrupt broadcast
GSelecting PTY
GPTY seek
GPTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
"ALARM" appears in the display and the emer-
gency broadcast can be heard.
∗ For details on "Emergency broadcast", refer to the
section "RDS operation" of each owner's manual.
GCancelling an emergency broadcast
] button to enter