Operations; Basic Operation - Clarion FZ105BT Owner's Manual And Installation Instructions

5. OPERATIONS

Basic Operation

Note: Be sure to read this chapter referring
the chapter "4.CONTROLS"
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
Setting The Clock
1. Press [ MENU ] button to enter System Menu.
2. Press [ ] or [
the Clock.
3. Rotate the [ VOLUME ] knob to set clock,
rotating the [ VOLUME ] clockwise to adjust
the minutes and counterclockwise to adjust
the hours.
Power On/Off
Note:
Start the engine before using this unit.
Be careful about using this unit for a long
time without running the engine. If you drain
the vehicle battery too far, you may not be
able to start the engine and this can reduce
the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ / MUTE ] button to turn
power On or Off .
5
FZ105BT
to
] button to select
Engine ON
position
the
Selecting a mode
1. Press the [SOURCE] button to display source
menu.
* External equipment not connected to this unit
is not displayed.
Adjusting the volume
1. Rotating the [VOLUME] to increase/decrease
the volume.
The adjustable range of volume is o to 46.
Mute
[MUTE]
Press the button to turn the mute On and
Off .
Display System information
[INFO]
press the button on the front panel to
switch the display information, system time and
playing source.