Storage; Disposal; What If There Are Problems; Technical Data - Beurer HK 48 Cosy Instructions For Use Manual

CAUTION
• Do not use pegs or similar items to attach the cover with integrated heat pad to the clothes horse.
Failure to observe this may result in damage to the item.
• Do not reconnect the control to the heat pad until the cover with integrated heat pad, the plug-in
connector and the inner pad are completely dry. Otherwise there is a risk of electric shock.
• Fit the inner pad back into the cover with integrated heat pad.
WARNING
Never switch the heat pad on to dry it! Otherwise there is a risk of electric shock.

6. Storage

If you do not plan to use the heat pad for a long period of time, we recommend that you store it in the original
packaging. For this purpose, disconnect the control from the heat pad by unplugging the
plug-in coupling.
CAUTION
Please allow the heat pad to cool down before storing. Otherwise the
•
heat pad may be damaged.
To avoid sharp folds in the heat pad, do not place any objects on top
•
of it while it is being stored.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem
The temperature settings are not illuminated while
- the control is properly connected to the heat pad
- the power plug is connected to a working socket
- the slider is set to 1, 2 or 3

9. Technical data

See the rating label on the heat pad.

10. Guarantee / service

Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet
supplied.
Cause
The safety system has
switched the heat pad
off permanently.
16
Solution
Send the heat pad
and the control for
servicing.