Assembling The Nano Enclosure - Smartbox Grid Pad 12 Installation Manual

4

Assembling the Nano enclosure

If you already own a HeadMouse Nano, you will need to assemble
the enclosure with the camera inside before mounting to your Grid
Pad.
1. Remove the four screws using the supplied M3 screwdriver
and remove the back of the mount.
2. Configure the HeadMouse Nano cameras DIP Switches to
your preferred settings. For more information on these see
section 11.
8
Grid Pad 12 headmouse nano - guide - B - UK.indd 8 Grid Pad 12 headmouse nano - guide - B - UK.indd 8
DIP Switches
12/05/2021 16:29 12/05/2021 16:29