Instrucciones De Línea De Comandos (Cli) - CAMBRIONIX PowerPad8S User Manual

5.5.7 Instrucciones de línea de comandos (CLI)
Command Line Instructions can be used to control and monitor the functions of the
hub and attached devices. To use the command-line interface a serial terminal emulator must
be installed on the host computer. Algunos ejemplos son Serial, ZTerm, PuTTy y Minicom. If you
would like more information, please look at our more in-depth information here:
www.cambrionix.com/cli
Two example commands can be seen below, you can use these commands to check hub
information and health.
system
health
PP8S
Su firmware de Cambrionix podría estar dañado
Do not interrupt the Firmware update process.
l
Do not disconnect the power during the update process.
l
Comando
PRECAUCIÓN
Acción
Mostrar información de hardware y firmware
Mostrar voltajes, temperaturas, errores e indi-
cador de arranque
Página 23 de 38