Page 1
Personal Water-resistant Voice Amplifier Operation manual...
Page 2
█ iTour Personal Water-resistant Voice Amplifier Congratulations and thank you for purchasing this personal water-resistant voice amplifier. To ensure a trouble-free operation, please read the manual thoroughly to fully understand its controls and functions. In the box iTour amplifier Headset microphone...
Instructions █ Parts and functions BLUETOOTH power Volume down button Volume up button Power on/off button push button Battery low indicator BLUETOOTH pairing indicator TABLET / PHONE Microphone input (3.5mm) MUSIC IN socket (3.5mm) Charging indicator DC input jack Battery cover Rotary clip Counterclockwise 45°...
█ iTour Personal Water-resistant Voice Amplifier Battery replacement Rotate the clip to remove from the unit. Remove the battery cover. Insert four AA batteries and replace the cover.
Page 5
Instructions █ Using the headset microphone Plug a headset microphone with a 3.5mm plug to MIC IN. Turn ON master POWER and adjust master volume to desired level. To avoid feedback, DO NOT face the microphone to the speaker.
Page 6
█ iTour Personal Water-resistant Voice Amplifier Operating BLUETOOTH receiver (BT) Turn on master POWER and then press the switch button (BT) 3 seconds to turn on the BLUETOOTH receiver. The pairing indicator will flash green. flash GREEN And then the indicator will flash green and red. The amplifier is ready for pairing.
Page 7
Instructions █ Important ◼ The BLUETOOTH automatically turns off after no pairing for 5 minutes. ◼ Press switch button (BT) for disconnection and getting ready for new pairing. ◼ The BLUETOOTH can memorize and automatically connect to last-paired device. Music audio input (MUSIC IN)- Smart phone / tablet / MP3 player Connect your device to the 3.5mm jack of AUX IN with a 3.5mm 3-pole stereo audio cable.
Need help?
Do you have a question about the iTour and is the answer not in the manual?
Questions and answers