Table of Contents
Advertisement
Setting
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the filter,
be sure to select RESET and set the timer. The Filter warning
icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to "Resetting the
Filter Counter" on page 52.
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Quit
Exit the Setting Menu.
50
Filter counter
Use the Point
to set the timer. Select
from (Off/100H/ 200H/
300H) depending on the
use environment.
Fig.3 Filter warning icon
Filter warning icon appears on the screen at a set
time.
✔
Note:
•This icon also appears at turning on.
Fig.4 Filter warning icon
✔
Notes:
•At selecting input source, the icon (Fig.4) will
appear.
•The Filter warning icons (Fig.3 and Fig.4) will not
appear when the Display function is set to "Off"
(p.42), during "Freeze"(p.24), or "No show"
(p.25).
Factory default
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
7 8
buttons
Select [Yes] to
activate it.
Advertisement
Table of Contents
