Eiki PLC-XU101 Owner's Manual page 31

Computer Input
Display area H
Use the Point 7 8
displayed by this projector.
Display area V
Use the Point 7 8
displayed by this projector.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Quit
Exit the PC Adjust Menu.
✔
Note:
Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu
(p.27).
30
buttons to adjust the horizontal area
buttons to adjust the vertical area
Move the red frame
pointer to an item and
press the SELECT
button.
To clear adjusted data
Vacant
Values of "Total dots,"
"Horizontal," "Vertical,"
"Display area H," and
"Display area V."
To store adjusted data
Close this dialog box.
This Mode has stored
parameters.