Page 1
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Grove - GPS (Air530) Confused of your GPS not working well in urbans or outsides under only one or few statelite module? Then you should not miss our new Grove-GPS (Air530). It’s a high-performance, highly integrated multi-mode statelite positioning and navigation module.
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki suitable for GNSS positioning applications such as car navigation, smart wear and drone. [https://www.seeedstudio.com/Grove-GPS-Air530-p-4584.html] We've released the Seeed GPS Modules Selection Guide [https://wiki.seeedstudio.com/GPS-Modules-Selection-Guide/], it will help you choose the GPS Module that best suits your needs.
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Parameter Value Supply voltage 3.3V/5V Working current up to 60mA Time of warm start Time of cold boot Platforms Supported Arduino Raspberry Caution The platforms mentioned above as supported is/are an indication of the module's software or theoritical compatibility.
Page 4
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Note If this is the rst time you work with Arduino, we rmly recommend you to Getting Started with Arduino [https://wiki.seeedstudio.com/Getting_Started_with_Arduino/] before the start. Play With Arduino This sample simply reads from the GPS by using software serial and sends it back on the serial port.
Page 5
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Step 4. Connect Seeeduino to PC via a USB cable. Note If we don't have Grove Base Shield, We also can directly connect Grove - GPS to Seeeduino as below.
Page 6
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Software Note Please note that the u-center software is for windows only. Step 1. Install u-center [https://www.u-blox.com/en/product/u- center-windows] software. Step 2. Copy the code into Arduino IDE and upload. If you do...
Page 7
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki void clearBufferArray() // function t for (int i=0; i<count;i++) buffer[i]=NULL; // clear all index of array wi Step 3. Open U-center. Step 4. Click Receiver -> Port and select the COM port that the Arduino is using.
Page 8
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki We also can view data in Google Earth: Step 1. Click File -> Database Export -> Google Earth KML Step 2. This should launch Google Earth with the history that was captured by u-center.
Page 9
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Attention Tests would rather be taken outdoors to avoid location inaccuracy caused by bad signal transmission. Schematic Online Viewer https://wiki.seeedstudio.com/Grove-GPS-Air530/ 9/12...
Page 10
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Resources [ZIP] GPS Schematic(PDF) [https:// les.seeedstudio.com/wiki/Grove-GPS_Air_530/Grove- GPS_Air530_v1.0_.zip] [PDF] Air 530 User Booklet [https:// les.seeedstudio.com/wiki/Grove- GPS_Air_530/Air530_GPS_User_Booklet.V1.7.pdf] https://wiki.seeedstudio.com/Grove-GPS-Air530/ 10/12...
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki Projects Project of GPS/GPRS Tracker: In this new project we will present our GPS Tracker connected using the GPRS technique and MQTT protocol. (https://www.hackster.io/OHAlgerie/proje of-gps-gprs-tracker-36c425) Project of GPS/GPRS Tracker (https://www hackster io/OHAlgerie/project-...
Page 12
7/24/22, 10:43 AM Grove - GPS (Air530) - Seeed Wiki [https://www.seeedstudio.com/act-4.html? utm_source=wiki&utm_medium=wikibanner&utm_campaign=newpr oducts] https://wiki.seeedstudio.com/Grove-GPS-Air530/ 12/12...
Need help?
Do you have a question about the Grove GPS Air530 and is the answer not in the manual?
Questions and answers