Advertisement
3. CHARGING
Note: Fully charge the lamp before first use - approx. 3.5 hours.
3.1.
Connect the charger into the charge socket on the back of the lamp
(Fig.2). Plug it into the power supply and turn it on, the charging light
(Fig.1A) will illuminate to show that charging has commenced.
Please Note: The charging light remains on and does NOT extinguish
when the lamp is fully charged.
3.2.
Disconnect the charger from the lamp when it has been sufficiently
charged.
4. OPERATION
4.1. Direct the lens away from your eyes before switching on.
Toggle the lamp between 30 LED, 7 LED and OFF using the push
switch on the front (Fig.1B).
4.2. Suspend the lamp by the hanging hooks. When the light is hanging
from one hook it can be rotated through 360° for more precise
positioning.
4.3. Alternatively use the integral magnets to attach the lamp to any
ferrous surface (Fig.2).
5. MAINTENANCE
5.1. Keep the inspection lamp clean from dirt and grease using a damp
cloth.
DO NOT submerge in water.
Note: LED arrays are designed to allow individual LEDs to cease
functioning without causing the entire array to fail. This could be as a
result of shock or impact. Shock or impact will invalidate warranty.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be disposed of in
an environmentally protective way.
Remove the 6 screws on the back of the lamp. Remove the back
casing, and disconnect the wiring to the charger port and from
the battery to the circuit board. Dispose of battery according to
local government guidelines.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Battery Removal
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
LED024
Fig.1
Fig.2
Issue: 2 - 12/10/11
Advertisement
