AUTOHELM Masterview ST80 Manual page 2

CE MARKING OF EQUIPMENT/REPLACEMENT PARTS
WARNING
If the Autohelm equipment under repair, test, calibration, installation or
setting to work carries the European CE mark, only parts and components
supplied or approved for such use by Autohelm should be used in order to
maintain compliance with the relevant CE requirements.
Incorporation, use or attachment, by any means, of parts or components
not supplied for or not approved for such use by Autohelm or, if supplied or
approved for use by Autohelm, not properly fitted in accordance with
instructions published, provided or recommended by Autohelm, may cause
the equipment to malfunction and, in particular, to become unsafe or to no
longer meet the relevant CE requirements. In these circumstances,
Raytheon Marine Europe Ltd excludes liability to the fullest extent permissi-
ble in law for any loss or damage including any liability for its contribution to
such loss or damage by its negligent acts or omissions .
2 Masterview Service Manual 83028_1
ST80 Masterview