Ä User License; Initializing Your User License; Ä Error Messages - Roland SH-101 User Manual

User License
The Model Expansions are linked to the user license of the user who
downloaded them.
You cannot import or install Model Expansions with different user
licenses on a single JUNO-X.
User A
A
EXZ001
When you want to import or install a SH-101 Model Expansion that has
a different user license from the Model Expansions already registered
in the JUNO-X, follow the steps to initialize the user license.
A

Initializing Your User License

By initializing the user license, you can install a SH-101 Model
Expansion that you've downloaded with a new user license.
NOTE
¹ This deletes all Model Expansions that are already installed.
¹ Never turn off the power or remove the USB flash drive while the
"Executing... " message is shown.
1 .
Press the [MENU] (WRITE) button on the JUNO-X.
Use the [ Ç SELECT É ] knob to select "UTILITY", and
2 .
press the [ENTER] (INIT) button.
Use the [ Ç SELECT É ] knob to select "FACTORY
3 .
RESET", and then press the [ENTER] (INIT) button.
The FACTORY RESET screen appears.
Select the item using the [ Ç SELECT É ] knob, and
4 .
using the [ENTER] (INIT) button to select or deselect
the items, select only the "Remove License" check
box.
User A User B
A
B
EXZ005
A
User A User B
A B
EXZ005 EXZ005
Initialize
* If you have not imported or installed a Sound Pack, Wave Expansion
EXZ005
or Model Expansion, the "Remove License" check box is not shown.
* If you select the other check boxes besides the "Remove License"
check box and execute this operation, this initializes all of the
corresponding data. See "Returning to the Factory Settings (Factory
Reset)" in the JUNO-X Startup Guide for details.
Press the [ Ë ] button.
5 .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
6 .
To execute, use the [- VALUE +] knob to select "OK",
and then press the [ENTER] (INIT) button.
"Completed. Turn off power" is shown on the display.
7 .
Turn the JUNO-X off.
This initializes the user license.
8 .
Follow the steps in "Installing the SH-101 Model
Expansion" (p. 4) to install the SH-101 Model
Expansion on the JUNO-X.
Error Messages
Indication
USB Memory Not Ready!
Expansion File Not Found!
Incorrect File!
Incorrect License! Please
Remove License
Expansion Memory Full!
It has already been installed
Using the SH-101 Model Expansion
Action
The USB flash drive cannot be recognized. Make sure that
your USB flash drive is correctly inserted into the JUNO-X.
This is shown when there is no Expansion file in the USB
flash drive.
Make sure that the file has been correctly saved and that
the file extension is ".exz".
This is shown when the selected file is not supported by
the JUNO-X, or when the file is corrupted.
Check which instruments support the original download,
and try downloading again.
This is shown when the SH-101 Model Expansion is
currently linked to a different user license.
To install, provide a file that uses the same user license
as the Expansion already installed, or initialize the user
license.
This is shown when there is not enough free memory to
install an Expansion.
In this case, you can uninstall Model Expansions that are
already installed to free up memory.
This is shown when the SH-101 Model Expansion has
already been installed.
You don't need to reinstall.
5