Clarion DXZ758RMC Owner's Manual page 21

Cd/mp3/wma receiver / cenet control & music catcher
Hide thumbs Also See for DXZ758RMC:
Table of Contents

Advertisement

2. Files without MP3/WMA data will not play.
The indication "––:––" appears in the play
time display if you attempt to play files with-
out MP3/WMA data.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select "ISO9660 level
1, 2 or JOLIET or Romeo" as the writing soft-
ware format. Normal play may not be possible
if the disc is recorded on another format.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 128 single byte alpha-
betical letters and numerals (including an ex-
tension).
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8 hier-
archical levels will be impossible.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were re-
corded onto a disc. (Tracks might not always be
played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can se-
lect which type of the recorded tracks to play.
● Default value is "CD".
Each time you press and hold the [BND] button
for 1 second or longer, the mixed mode is
switched between CD type or MP3/WMA type.
1. Types of recording that can be played are as
follows.
Setting
Set to CD
Disc
Mixed with CD and
Play CD
MP3/WMA type tracks
CD type track only
Play CD
MP3/WMA type track only
Play MP3/WMA
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
Loading a CD
1. Press the [Q] button. The SLOPING
CONSOLE opens.
2. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD does not insert easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion slot.
Backup Eject function
Pressing the [Q] button ejects the disc even if
the power to the unit was not turned on.
1. Press the [Q] button. Remove the disc after
it is ejected.
Note:
• Always close the sloping console after opening it
or ejecting the CD.
• Be careful not to catch your hand or fin-
gers while closing the SLOPING CON-
SOLE.
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
Set to MP3/WMA
out from cellophane tape or a rental CD la-
bel, or discs with marks where cellophane
Play MP3/WMA
tape or rental CD labels were removed. It
may be impossible to extract these discs
Play CD
from the unit and they may cause the unit
Play MP3/WMA
to break down.
CD/MP3/WMA Operations
or
CAUTION
DXZ758RMC
mark and
21

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF