Digital Radio/Dab Operations - Clarion DXZ758RMC Owner's Manual

Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [PS/AS] button.
2. When the desired station is found, press the
[PS/AS] button again to remain tuned to that
station.
Note:
• Do not press and hold the [PS/AS] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select "TV AREA".
3. Turn the [ROTARY] knob to select the recep-
tion area.
4. Press the [ADJ] button to return to the previ-
ous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting depends on the TV.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select "TV
DIVER".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
● ON:
Sets the diver setting to ON.
● OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the previ-
ous mode.
TV Operations
Digital Radio / DAB Operations
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separetely), all func-
tions can be operated.
Listening to the DAB station
1. Press the [SRC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching the display
1. Each time you press the [TITLE] button, the
display switches in the following order:
S-LABEL PTY
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [SRC] button to select the DAB mode.
2. Move the [a]/[d] lever for 1 second or
longer.
"DAB" lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [SRC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1 sec-
ond or longer. "MANU" lights up in the dis-
play.
3. Move the [a]/[d] lever to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
35
DXZ758RMC