Overview; Safety Guidelines; Safety Guidelines For Hazardous Locations - National Instruments NI-9866 Getting Started

Overview

This document explains how to connect to the NI-9866.
Note
Before you begin, read the NI-9866 Safety, Environmental, and
Regulatory Information document on
software and hardware installation procedures in your chassis
documentation.
Note
The guidelines in this document are specific to the NI-9866. The
other components in the system might not meet the same safety ratings.
Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.

Safety Guidelines

Caution
Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.

Safety Guidelines for Hazardous Locations

The NI-9866 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous
locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 hazardous locations; and
nonhazardous locations only. Follow these guidelines if you are installing the
NI-9866 in a potentially explosive environment. Not following these guidelines may
result in serious injury or death.
Suivez toutes les instructions et respectez toutes les mises
NI-9866 Getting Started
ni.com/manuals and complete the
3
© National Instruments