Securing The Oven To The Cabinet - Daniela DAN5TFS User Manual

SECURING THE OVEN TO THE CABINET

1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two distance holders "A" which fit the holes in
the oven frame and fit the two screws "B".
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen
unit that are next to the oven must be made of a heat resistant material. Ensure that the glues of
units that are made of veneered wood can with stand temperatures of at least 120ºC. Plastics or
glues that cannot withstand such temperatures will melt and deform the unit, once the oven has
been lodged inside the units, electrical parts must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place so that it is impossible to remove them
without using special tools. Remove the back of the kitchen unit to ensure an adequate current of
air circulates around the oven. The hob must have a rear gap of at least 45mm.
• DURING USE THE APPLIANCE BECOMES HOT! CARE SHOULD BE TAKEN TO AVOID
TOUCHING HEATING ELEMENTS INSIDE THE OVEN.
• ACCESSIBLE PARTS MAY BECOME HOT DURING USE. YOUNG CHILDREN SHOULD BE
KEPT AWAY.
• DO NOT USE HARSH ABRASIVE CHEMICALS OR SHARP METAL SCRAPERS TO CLEAN
THE OVEN GLASS!!! THEY CAN SCRATCH THE SURFACE, WHICH MAY RESULT IN THE
SHATTERING OF THE GLASS.
• For a built-in oven to work well the cabinet must be of the right type.
• The panels of the adjoining furniture should be heat resistant. Particularly when the
adjoining furniture is made of veneered wood, the adhesives should be able to withstand
a temperature of 120ºC.
• Plastic materials or adhesive which cannot withstand this temperature will become
deformed or unstuck.
• To comply with safety regulations, once the appliance has been fitted it should not be
possible to make contact with the electrical parts.
• All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
• Ensure that the appliance is switched off before replacing the lamp to avoid the possibility
of electric shock.
PA G E 8
P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au