Intermec CK30 Instructions

To put on the holster and belt
1 Slide the holster to the appropriate side of the belt.
2 With the holster on the outside of your thigh, buckle the belt
around your waist.
Leg
strap
3 Adjust the belt so it is snug and comfortable for you, and secure
the loose end of the belt in the J-hook.
4 Buckle the leg strap around your thigh.
5 Adjust the leg strap so it is snug and comfortable for you.
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2004 Intermec Technologies Corp.
All Rights Reserved
AL1 and AL4 Holster and Belt Instructions
*073508-002*
P/N 073508-002
J-hook
Waist belt
buckle
AL1 and AL4 Holster and Belt Instructions
The holster and belt provide you with a convenient way to carry the
CK30 Handheld Computer when you are not using it.
Holster and belt: The versatility of the holster allows you to use it on your left or
right side whether or not your CK30 has a handle.
The CK30 has either a wide case or a standard case, depending on
the type of internal scanner that is installed. The holster and belt are
available in two models to accommodate each case. Use the AL4
holster and belt for a wide case CK30 and the AL1 holster and belt
for a standard case CK30.
Wide
case
CK30 case: This illustration shows the difference between the CK30 wide case and
the CK30 standard case.
Standard
case