Intermec 761 Software Update
Intermec 761 Software Update

Intermec 761 Software Update

Intermec 761: software guide
Hide thumbs Also See for 761:

Advertisement

Instructions
Upgrading the
Server Applications
Software v1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 761 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intermec 761

  • Page 1 Instructions Upgrading the Server Applications Software v1.2...
  • Page 2 The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.
  • Page 3 Contents How These Instructions Are Organized ... 5 Upgrading a Server Running Windows 2000... 5 Upgrading a Server Running Windows Server 2003 ... 7 Troubleshooting ... 9 Upgrading the Server Applications Software v1.2 Instructions...
  • Page 4 Upgrading the Server Applications Software v1.2 Instructions...
  • Page 5: How These Instructions Are Organized

    Instead, you must perform one of these tasks: • Upgrade the G4000A with the Windows Server 2003 Upgrade Kit • Or, contact Intermec and arrange for a service technician to Upgrading the Server Applications Software v1.2 Instructions ®...
  • Page 6 If you do not connect the G4000A to the Ethernet network, the installation will eventually fail. 5 Make sure you have the Intermec Server Applications CD. 6 Turn on the G4000A. The G4000A boots, and the Intermec logo screen appears. 7 If you are prompted to log in, press Ctrl-Alt-Del, enter administrator password.
  • Page 7: Upgrading A Server Running Windows Server 2003

    16 To verify that the software installed correctly, perform these two tests: • Look at the desktop. The model appears on the right side of the screen. • Double-click the Intermec Gateway icon to open the home page in Internet Explorer. If you are prompted to log in, enter administrator You must type Application Server.
  • Page 8 11 The installation wizard displays a screen with the message, “Welcome to the InstallShield Wizard for Intermec Server Applications.” Select the model of your Intermec Application Server from the list and click Next. Note: If the installation appears to hang, see “Troubleshooting” on page 9 for possible solutions.
  • Page 9: Troubleshooting

    Upgrade your G4000A with the Windows Server 2003 Upgrade Kit (P/N 074372). • Contact Intermec and arrange for a service technician to reimage your G4000A with the Windows 2000 SAK Reimage Kit. If this message does not clear from the screen after 10 minutes, the upgrade has failed.
  • Page 10 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2005 Intermec Technologies Corporation. All rights reserved. Upgrading Server Application Software v1.2 Instructions *931-007-001* P/N 931-007-001...

Table of Contents