CTC Union IMC-100C Quick Installation Manual

CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2015 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-100C(-E) are compact Fast Ethernet media converters that
support conversion between electrical 10/100Base-TX and optical
100Base-FX Ethernet. Housed in rugged DIN rail or wall
mountable enclosures, these converters are designed for harsh
environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental
conditions exceed commercial product specifications. Standard
operating temperature range models (-10°C to 60°C) and wide
operating temperature range models (-40°C to 75°C) fulfill the
special needs of industrial automation applications.
Features
 DC input power 12/24/48VDC or 24VAC
 Compact size and fanless
 IP30 rugged metal housing
 Wide temperature range -40°C~75°C (IMC-100C-E)
 Support Link Fault Pass Through (LFPT)
Specifications
Ethernet Interface
 Standards: IEEE802.3, 802.3u
 Connector: RJ-45 (shielded)
 Auto MDI/MDI-X
 Speed: 10/100Base-TX
 Support 802.3x Flow Control
 Store & Forward Switch/Pass Through Converter mode (by DIP)
 1024 MAC addresses in Switch mode
 Packet Length: 2046 bytes (in Switch mode)
 Jumble Frame: 9600 bytes (in Converter mode)
 Link Fault Pass Through (LFP) (enable/disable by DIP)
Optical Interface
 100Base-FX
 Options for SC or ST connectors
 Multimode (2KM) 50/125um, 62.5/125um
 Single mode (30KM or 50KM) 9/125um
 Wavelength: 1310nm (S/M or M/M)
 Fiber Port Full Duplex or Half Duplex (by DIP)
www.ctcu.com
- 1 -
Quick Installation Guide
IMC-100C
IMC-100C-E
Industrial 10/100Base-TX to 100Base-FX Fiber Converter
(Compact)
sales@ctcu.com
Specifications (cont.)
Power
 DC Input Power: 12/24/48VDC (9.6~60VDC) or 24VAC
(18~36VAC)
 Reverse Polarity Protection: Yes
 Connector: Removable 2-pin terminal block
 Consumption: 1.8W (DC 12V), 1.8W (DC 24V), 2.1W (DC 48V)
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 70 mm (D) x 30 mm (W) x 103 mm (H)
 Mounting: DIN-Rail mounting, Wall mounting (Optional)
 Weight: 215 g
Environmental
 Operating Temperature: -10°C~60°C (IMC-100C)
-40°C~75°C (IMC-100C-E)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC Part 15 Subpart B
Class A, CE EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (EFT) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength:
300A/m, Criteria A
 Shock: IEC 60068-2-27
 Freefall: IEC 60068-2-32
 Vibration: IEC 60068-2-6
 MTBF (MIL-HDBK-217): 319,971 Hours
V1.0
- 2 -